This Tracker is a GPS / GSM/ GPRS tracking device which is specially developed and designed for vehicle real-time tracking and security. With its internal 8MB memory, This Trackercan store offline GPS data packet or log at a preset time interval. It working based on existing GSM/GPRS network and GPS satellites, so it can be used in all over the world.The best feature of it different from other trackers are, include all GPS car tracker necessary functions, Get street name from cell phone for google maps, configurable by PC or SMS remotely, get car door, windows status remotely, connect with current car alarm, fuel lever detect.

Main Features:

• - SMS and GPRS TCP / UDP Communication
• - Real time tracking
• - Track on demand
• - Track by time interval
• - Track by distance interval
• - Track on mobile phone
• - Two way audio or voice monitoring
• - Internal 8MB flash memory for logging
• - Internal backup battery
• - Sleep / power down mode
• - SOS alarm / Geo-fence alarm / GPS blind area alarm / low battery alarm
• - Speeding alarm/ impact alarm/ tow alarm/ GPS Antenna cut alarm/ external power cut alarm
• - Mileage report / Engine report
• - Digital input, analog input, output
• - Handset phone, camera, RFID reader (optional)
• - SIRF IV module

Alert:
- When This Trackerenters GPS blind area
- When This Trackeris turned on

Interface:
- 5 digital inputs
- 3 negitive and 2 positive triggering
- 2 analong inputs
- 5 outputs

LED: 2 LED lights to show GPS / GSM working status

Blue LED Indicating GPS Status:
- ON: ONE OR MORE INPUTS ARE ACCTIVE
- Flashing (every 0.1 second): The unit is being initialized
- Flashing (on for 0.1 second and off for 2.9 seconds): This Trackerhas a GPS fix

Green LED indicating GSM status:
- ON: One call is coming in / one call is being made
- Flashing (every 0.1 second): The unit is being initialized
- Flashing (on for 0.1 second and off for 2.9 seconds): This Trackeris connected to the GSM network
- Flashing (on for 1 second and off for 2 seconds): This Trackeris not connected to the GSM network

SOS Button: press it to send SMS alert

Time to First Fix:
- Reacquisition: 0.1s
- Cold Status: 42s
- Warm Status: 38s
- Hot Status: 1s

 

• Frequency: GSM 900 / 1800 / 1900Mhz or GSM 850 / 900 / 1800 /1900Mhz
• GPS Sensivity: -158Db
• C / A Code: 1.023 MHz chip rate
• Channels: 20 channel all-in-view tracking
• Position Accuracy: 10 meters, 2D RMS
• Velocity Accuracy: 0.1m / s
• Time Accuracy: 1 us synchronized to GPS time
• Altitude Limit: 18,000 meters (60,000 feet) max
• Velocity Limit: 515 meters / second (1000 knots) max
• Flash Memory: 8MB
• I / O: 5 digital inputs, 3 negative and 2 positive triggering, 2 analog inputs, 5 outputs
• Power Supply: 9V ~ 35V, 1.5A
• Backup Battery: 850mAh
• Operating Temperature: - 20 ~ + 55 centigrade
• Humidity: 5% ~ 95% non-condensing
• Dimensions: 104 x 62 x 24mm
• Color: Blue
• Weight: 680g
• Approved: CE / FCC
• After Sales Service: 1 Year Warranty

Accessories:

• 1 x Wires
• 1 x Power supply cable
• 1 x GSM Antenna
• 1 x GPS Antenna
• 1 x User Manual

Connecting and Installation:

• 1. Ensure that your This Trackerhas a working SIM installed
  - Check that the SIM has not run out of credit (test the SIM in a phone to make sure it can send and receive SMS)
  - Check that the SIM Lock code is turned off
  - If you require the function of sending an SMS location report to the authorized phone number when it makes a call to the DA300, please make sure the SIM installed supports displaying caller ID
• 2. Before inserting SIM card, cut off the power for the AVL unit
  - Install SIM Card
  - Connect the GSM Antenna to the unit
  - Connect the GPS Antenna to the unit
• 3. GPS antenna is used to receive satellite signals in the sky. It should be fixed to face the sky and should not be covered or shielded by any objects containing metal, such as the metallic windshield
• 4. Find a suitable place inside the car for installing the unit. Wiring connections must be firm and reliable and the joints should be wrapped with insulating tape tightly. The unused electrical wire should be properly insulated
• 5. Check if all wirings have been connected correctly and then connect the unit to the motor power